Our Battery Ride-on Service includes… Clean and remove all debris from transmission housing. Inspect the transmission for external damage, check all transmission. Remove wheels, clean shafts grease, and re-fit wheels. Check for the correct operation of the transmission brake and the linkages that lead to it. Check the front axle for free play. Adjust if necessary. Lubricate front axle centre point. Check steering quadrant and lubricate. Check all steering nuts and bolts, check steering stops (if fitted). Check for full movement of steering in all directions. Check tyre pressures. Plug machine into diagnostic tool and run a diagnostic to check for latest firmware updates and any fault codes. Check the security of the battery, and connections to the battery. Batteries should only be charged on the recommended battery charger. Check the wiring harness for damage especially in areas where it passes through chassis holes, or at securing points for chaffing. Check all safety switches for wear and security and connections of wiring to them Check for the correct operation of all safety switches. Examine for damage to the deck shell. Sharpen or cutter blades. Check that the blades for damage and are correctly balanced, if sharpening and refitting, check blades are correctly balanced. Check cutter shafts and bearings for wear and or damage.