Chainsaw sharpening and servicing.


We re-sett your chain so that every tooth is the same size and all at the same angle and check the height of your rakers so it will cut well and true. Run and test all machine functions

The cost runs from £13.25 for bars under 16″ (41cm) to £15.65 for a bar 16½” (42cm) to 24″ (61cm). Relly large bars, over 24″ (61cm) priced on inquiry.

If your chain is in a dangerous condition we will advise that you replace it with a new chain, and we will let you have a price to supply and fit this new chain.

If we believe your blade is in a dangerous condition we will not refit it.

Servicing you chainsaw

If your machine is not running or is running poorly it may need to be booked in as a repair before we service it.



bars under 16″ (41cm)



16½” (42cm) to 24″ (61cm)

Very Large


over 24″ (61cm)

The chainsaw service is one of the more complicated services we do. Chainsaws are very powerful and dangerous machines. They need their safety features regularly checked. Our chainsaw service includes…

  • Fit a new spark plug.
  • Clean the cooling fins on the cylinder.
  • Fit a new air filter.
  • Fit a new fuel filter.
  • Check chain drive sprocket for wear. Replace if necessary.
  • Lubricate the clutch drum bearing.
  • Check chain condition, sharpen or replace. 
  • Check the brake band on the chain brake for wear.
  • Clean the chain brake and check its function
  • File off burrs on the sides of bar.
  • Check bar blains are parallel.
  • Clean the bar and sprocket tip.
  • heck the lubrication hole in bar. 
  • Check function of oiler.
  • Check chain catcher is undamaged, replace if necessary.
  • Check the throttle trigger operation.
  • Check throttle trigger lockout.
  • Test the stop switch to be sure it shuts off the engine.
  • Check the starter and starter cord for wear or damage. 
  • Check for any loose nuts and screws.
  • Check engine running speed and tune carburettor.
  • Check that the Anti-Vibration elements are not soft or torn.

If the machine is deemed dangerous, for example, a hole in the chassis, this will need making safe before we can return your mower or if the machine is to be returned without repair, it will have its sparkplug or blade removed to leave it not running.

Any machine left for more than two weeks after the work has been completed will be considered abandoned, and disposed of.